Connect your 3D printer to “Printers & Filament” once. You then see its status and spools, the filament of every print is deducted, and on many printers you start models straight from 3DSEARCH.
You sign in with your account at the manufacturer. Nothing to install.
One command line via SSH on the printer or the Raspberry Pi. No port forwarding needed.
Runs on a Pi, a NAS or in Docker, finds your printers on the network by itself and looks after several at once.
Kobra S1, Kobra S1 Max, Kobra 3, Kobra 3 V2, Kobra X and other Anycubic printers with cloud
ACE Pro and ACE 2 Pro are shown with all slots, including several units. With Rinkhals firmware the printer also works as a Klipper printer.
K1, K1 Max, K1C, K2 series, Ender-3 V3, Hi and other printers in Creality Cloud
Printing with CFS mapping is new and still being tested. Rooted K1 printers also work as Klipper printers. The Ender-3 V3 SE and older Enders without Wi-Fi work via OctoPrint.
X1, P1, A1 series and H2D
Status, AMS and deduction yes – starting prints is not possible because Bambu Lab blocks it for other apps since January 2025.
Printers in the Elegoo Matrix app, e.g. Centauri Carbon 2
View only: status, CANVAS slots and print history. New and hardly tested on real printers yet.
MK4/MK4S, MK3.9, Core One, XL, MINI+ and MK3S with Raspberry Pi
Two ways: with Prusa Connect you sign in with your Prusa account, nothing to install – status, MMU slots, filament tracking, pause and cancel (beta). Printing from our server currently works only through the bridge, which uses PrusaLink in your home network. We are still looking for testers with real Prusa printers.
Voron, Qidi, Sovol, Elegoo Neptune 4, Snapmaker U1, Anycubic with Rinkhals, rooted Creality K1 and every other printer running Klipper with Moonraker
Works with Mainsail and Fluidd, including multi-colour units (MMU, AFC) and multi-head printers.
AD5X, Adventurer 5M and 5M Pro with the community firmware ZMOD
ZMOD turns the printer into a Klipper printer with Moonraker; you then connect it through the bridge. It does not work with Flashforge’s original firmware. The AD5X’s IFS slots are not shown yet. New – not yet tested on real Flashforge printers.
Any printer run by OctoPrint, usually a Raspberry Pi on the USB port – e.g. Ender 3, Prusa MK3, Ultimaker 2
On first start OctoPrint asks whether 3DSEARCH may connect – click “Allow” once.
Free during the beta. Connected in a minute.
Tell us which printer you have: after signing up, the connect wizard has a form for printers that are missing. We take every request into account when planning.